Adding A Signature Tag
Dec 27, 2015 9:03:47 GMT -5
Post by Huronna on Dec 27, 2015 9:03:47 GMT -5
This is a tag that will post at the bottom of your message every time you post. Most forums only allow height of 300-350 pixels. I have not been able to find any requirements for ProBoards. I would suggest you try to keep it that size. If the height is more pixels and it won't upload this may be your problem. You will see many larger tags and sometimes multiple ones, this is allowed at Animation Lessons, but remember many other forums do not permit this.
All signature tags MUST be fully credited. © to the artist and their url and your license # if it's a PTU image.
Check with the © Compliance Section to read what is needed on all tags posted.
1. Go to Profile
2. On the right upper side, click Edit Profile
3. Click the second tab ...Personal
4. Go to close to the bottom of this window until you see Signature
5. If you are using Photobucket or another storage site, copy the "image code" and paste it in this box.
6. If you want to center the tag place
7. You are also permitted to write a message in this area using a maximum of 400 characters.
8. You may also add a short message under a sig tag.
9. When completed, click Save Personal Settings.
All signature tags MUST be fully credited. © to the artist and their url and your license # if it's a PTU image.
Check with the © Compliance Section to read what is needed on all tags posted.
1. Go to Profile
2. On the right upper side, click Edit Profile
3. Click the second tab ...Personal
4. Go to close to the bottom of this window until you see Signature
5. If you are using Photobucket or another storage site, copy the "image code" and paste it in this box.
6. If you want to center the tag place
before the code and
after the code.7. You are also permitted to write a message in this area using a maximum of 400 characters.
8. You may also add a short message under a sig tag.
9. When completed, click Save Personal Settings.
